Why Does One AirPod Die Faster? Key Factors and Solutions

Apple AirPods have become famous for many people, but their users sometimes face problems, like one airpod draining the battery more quickly than the other airpod. All this is irritating, but it is essential to understand why this happens and how it can be fixed.

Understanding AirPod Battery Dynamics

AirPods have a lithium-ion battery that degrades over time. But if one AirPod drains the battery faster than the other, this problem may be due to your usage pattern. Sometimes, hardware issues and battery health are also affected.

 Battery Health and Degradation

Batteries lose their charging capacity over time and no longer hold as much power as they did when new. This means that one AirPod can drain the battery faster than the other if used more and charge the other.

Here’s why this happens:

 ● Capacity Loss:

Batteries lose their charging capacity after some time. After using too much, a battery that initially had 100% capacity comes down to 80%, which causes it to start draining rapidly.

● Charge Cycles:

 The battery’s charge cycle works like this: You charge the battery from 0 to 100% and then drain it from 100% to 0. This process is called one complete charge cycle. Due to this practice, the battery performance reduces, and the battery starts draining quickly.

 ● Chemical Reactions:

The AirPods use a Lithium-Ion battery. When the battery is repeatedly charged, a chemical reaction occurs, damaging it internally, affecting its performance, and reducing its capacity.

● Battery Calibration:

Sometimes, the battery level display of AirPods on your device is inaccurate. It feels as if your battery is draining rapidly.

Battery Recalibration:

After fully charging and then fully discharging your Airpods, you can get help by checking the exact battery level with the battery management system.

 Slowing Down Battery Degradation

Although all batteries lose their power capacity over time, you can slow down this process by following some tips and improving the performance of your AirPods.

1. Avoid Extreme Temperatures

• Keep AirPods Cool: Do not leave your AirPods in hot places, such as in a car or near any other heat source, as this may cause your battery to drain quickly.
• Protect from Cold: Do not keep your AirPods in icy places for a long time. This can negatively impact battery performance and later cause permanent damage to it.

 2. Use Low Power Mode

• If your device has a low-power mode, turn it on so your battery uses less power. Similarly, turn the volume off other features that drain your battery.

 3. Balance Usage

• Call Usage: If you frequently use one Airpod to make calls, it can drain the battery quickly. During that time, its microphone and speaker are always on, and this practice can even damage the battery.
• Mono Mode Listening: If you use your one AirPod regularly to listen to music and podcasts, they drain quickly.

 4. Charge Management

• Keep your AirPods between 20% to 80%. Avoid draining them to 0% and charging them to 100%.

Potential Hardware Issues to Extend Battery Life:

• Sometimes, the problem may not lie in your battery; it could be a hardware issue or physical damage.

Manufacturing Defects:

• It is very rare for one AirPod to get damaged. If your AirPods are under warranty, contact Apple Support for a replacement.

Physical Damage:

• Physical damage, such as moisture exposure or pressure, can cause issues with the AirPods’ battery. Even minor damage that you may overlook can lead to rapid battery draining.

Preventing Physical Damage:

• To keep your AirPods safe, use a protective case, keep them dry, and store them properly.

Software Glitches

Sometimes, battery problems may occur due to software malfunction. You can avoid these issues by keeping your software updated.

Firmware Updates:

• Apple releases the latest software regularly, which resolves battery-related issues with the AirPods.

 Reset Your AirPods: 

• Resetting your AirPods can solve many problems. The method to perform such a reset is available here:

1. You can forget your AirPods on your device by going to Settings > Bluetooth, tapping the “i” next to your AirPods, and selecting “Forget This Device.”
2. Put both AirPods in the charging case, close the lid, and wait 30 seconds. Then, open the lid and hold the setup button until the light flashes amber and white.
3. Reconnect your AirPods by opening the lid and following the on-screen instructions on your device.

Ways to increase the life of AirPods

Follow some tips to keep your One Airpod from dying quickly.

● Use both AirPods simultaneously:

Avoid using one airpod for long, especially during calls, so both airpods end together.

● Clean and Store Properly:

Clean AirPods regularly and store them in a dry, clean place when unused.

 ● Check Your Warranty:

If your AirPods are still under warranty, contact Apple Support for any issues. AppleCare+ may also cover accidental damage.

● Non-Warranty Repairs:

Apple offers repair services for a fee if your AirPods aren’t under warranty.

 ● Think About Replacement:

Sometimes, replacing a damaged AirPod is cheaper than repairing it. Taking care of your AirPods and troubleshooting them quickly can improve their performance and battery life.

Frequently Asked Questions